Solenoid

How To Test Your Hanvey Van Solenoid

• Find your van's multimeter (typically hangs on passenger wall in back of van).

• Turn the dial to approximately 10 o'clock position.

• This should read 20Vdc.

• Place the black lead on the terminal test strip location labeled "Ground".

• Place the red lead on the terminal test strip location labeled "S1".

• Note the number displayed on the multimeter screen.

• Move the red lead off "S1" and put it on the terminal test strip location labeled "S2".

• Note the number displayed on the multimeter screen.

• You can now turn off and put away the multimeter.

• Compare your findings between S1 and S2.

• If the difference of the two numbers is within 0.5V of each other, the solenoid is not bad.

• If the difference of the two numbers is greater than 0.5V of each other, it is time to replace your solenoid.

• Thank you so much for being the most important member of the Hanvey family!

• For additional support, please email us at support@gohanvey.com, or call 864-269-2912.