The 12vDC Panel and Inverter In the BVE conversion the Main 50 AMPS switch should remain in the “ON” position, as well as the Fresh Water, Waste Pump and the Exhaust Vent switches, unless there is an issue with the individual device. At the end of the day, turn off light switch #1 and #2, and camera. The Main 50 AMPS switch, and the Fresh Water switch must remain on overnight to allow the Water Heater to circulate and heat the Fresh Tank while Everwarm 2 is plugged in.
12vDC Panel the breaker formerly labeled Heater is now “Camera”, and the breaker formerly labeled Heat Boost is now “Radio”. The Camera switch controls the optional Owl Monitor in the front cab on the dash. The Radio switch controls the Bluetooth Stereo Amplifier for the rear salon speakers.