How to operate the Power Panel your Hanvey Grooming Van.
The Power Panel for your 12 volt power system is located on the left hand side of the back wall in your grooming area.
The top switch on this panel is your "master" switch and when it is turned off, everything else on the panel shuts off as well.
When it is on, it then allows the ones below to be on or off based on their state.
Your lights, water pumps, vent fan, and heater are all controlled on this panel.
If you have an Everwarm System, it is also controlled here.
To use your Everwarm overnight, you'll need to leave the master switch on and just turn the components off on their switches instead.
IMPORTANT NOTE
It's a good idea to turn the Power Panel on at the start of your day and off at the end of your day.
Turning things off between grooms doesn't save you any power and just puts wear and tear on the switches.
To the right of your Power Panel is a small power button.
Pressing this turns your Inverter on and off.
When the Inverter is on, the green light on the switch will come on and you'll have power to all of the 120 volt equipment in the van.
Thank you so much for being the most important member of the Hanvey family!
For additional support, please email us at support@gohanvey.com, or call 864-269-2912.
Related Videos
Changing Your Coolant Boost Pump With the new pump in place, reinstall...
If your Hanvey Force Dryer is "tripping" or shutting off...
Exhaust Vents This video goes over the troubleshooting steps to follow...