Fuses

Testing Fuses:

• A quick guide on making sure your fuses are good in your Hanvey van!

• Please note, this should only be performedafterchecking your alternator. The video on how to do this is linked below!

• Take the multimeter from the back of the van.

• Take the cover off the fuse panel on the drivers seat.

• Turn the multimeter to the 2000 ohm (around 7 o'clock on the dial) setting.

• Make sure the meter is working by touching the leads together and making sure the indicator goes from "1" to a number close to 0.

• Touch one of the leads on each piece of metal exposed on the top of the fuse.

• If the meter stays at "1", the fuse has blown and will need to be replaced.

• Try a couple of times if you do get a "1" to ensure you didn't just miss the metal with one of the leads.

• Thank you so much for being the most important member of the Hanvey family!

• For additional support, please email us at support@gohanvey.com, or call 864-269-2912.